VERTICAL IN LINE CENTRIFUGAL PUMPS
Fresh and sea water, condensate, oils chemical and petrochemical products.
Shipbuilding industry, heating plants, air conditioning systems, aqueducts, effluent treatment plants, fire fighting, petrochemical plants, etc.
Pump: centrifugal type with volute casing, vertical construction, single stage, single flow, in line flanges.
Impeller: high efficiency, close type, statically and dynamically balanced.
Axial thrust balancing by means of annular chamber with balancing holes located behind the impeller.
Mounting system: shaft supported by radial and thrust ball bearings either grease or self-lubricated. The bracket is normally made of cast-iron or manufactured in bronze or stainless steel for special executions (non-magnetic pumps).
Seal: single mechanical seals to DIN 24960. Special mechanical seals or cartridge type, for specific application or aggressive liquids. Possibility to install soft packing with external flushing. For temperature higher than 120°C, it is possible to fit the pump with a cooling chamber.
Self-priming: some listed models can be supplied with a self-priming element either with liquid ring or with air ejector.
BACK PULL OUT
It is possible to remove the rotating components without disturbing pipes, pump casing and motor by using a flexible spacer coupling.
The base plate is usually cast with pump casing for small and medium size pumps in order to increase the structural stiffness. For larger pumps a welded steel base plate is provided.
The motor frame supporting the electric motor is normally made of welded steel. For special executions (non magnetic) it can be manufactured in stainless steel.
Special versions according to Naval Rules are also available: shock-proof, vibration-proof, noise-proof, non magnetic version.
Garbarino MU/L – Design Features
|Maximum Capacity||Up to 1400 m3/h|
|Maximum Head||Up to 145 m|
|Maximum Speed||Up to 2900 RPM|
|Material Design||Cast Iron|
|Pump Size||On request|